基于粒子群算法的宽带真延时平面阵列方向图综合

针对大阵元间距平面阵列方向图综合问题,提出基于粒子群算法的宽带真延时平面阵列方向图综合方法。该方法根据真延时条件下阵列方向图主瓣和栅瓣指向的特点,采用宽带真延时抑制阵列方向图的栅瓣；利用粒子群优化算法优化阵列结构,得到具有较高主副瓣比的平面阵列方向图。通过对8×8的矩形平面阵进行仿真,验证了所提方法的有效性,在此基础上,还仿真研究了该方法对栅瓣的抑制性能与信号带宽之间的关系。     

基于误差校准的多雷达粒子滤波检测跟踪算法

基于粒子滤波的检测前跟踪方法是一种处理弱目标检测与跟踪的有效方法。使用多部雷达对同一目标进行观测,可以提高目标的检测概率和跟踪精度。但雷达系统误差不同,得到的目标量测信息不能直接进行融合。针对多个具有不同系统误差的雷达联合检测跟踪问题,通过将不同雷达的量测信息向前追溯,对误差进行校准,从而消除不同雷达对于同一粒子的量测误差,然后将粒子权重进行融合。仿真结果表明,在雷达具有不同系统误差的情况下,采用本算法可以有效提高目标的跟踪精度。     

不同分散剂对纳米SiO_2水中分散的影响

选取六偏磷酸钠(SHMP)、十二烷基苯磺酸钠(SDBS)及KCl作分散剂,并采用超声分散方法,制备纳米SiO2悬浮液,对纳米SiO2的水中分散性能进行研究。测试分散体系中纳米SiO2粒子的粒径及分布、Zeta电位及透光率,探讨了不同分散剂对纳米SiO2分散性能的影响。结果表明:不同分散剂对纳米SiO2的粒径都有明显影响,但粒径分布宽度差别较大;同在分散粒径较小的条件下,分别添加3种分散剂的悬浮液体系具有不同的稳定性,其中含SDBS的分散体系因静电和空间位阻的作用而表现出良好的分散稳定性。     

三关节机器人的神经网络补偿自适应控制器设计

三关节机器人广泛用于工业生产、轮式或履带式排爆机器人,为了补偿由于机器人结构参数、作业环境干扰等不确定性因素造成的机器人动力学模型的不确定性,将机器人动力学模型分解为名义模型和误差模型两部分,其误差模型采用RBF神经网络进行补偿,得到其估计信息,神经网络的输出权值根据Lyapunov稳定性理论采用自适应算法进行调整。所设计的神经网络补偿自适应控制器解决了不确定性机器人动力学系统控制器设计的不确定性问题,同时,通过定义Lyapunov函数,证明了控制器能渐近、稳定地跟踪期望轨迹。机器人的3个关节在控制器的作用下,约在5 s时达到期望轨迹,神经网络约在5 s时逼近机器人动力学模型的误差模型,实验结果表明了机器人关节对期望轨迹具有良好的轨迹跟踪性能。     

Investigation on the spatial distribution characteristics of behind-armor debris formed by the perforation of EFP through steel target

The behind-armor debris (BAD) formed by the perforation of an EFP is the main damage factor for the secondary destruction to the behind-armor components. Aiming at investigating the BAD caused by EFP, flash X-ray radiography combined with an experimental witness plate test method was used, and the FEM-SPH adaptive conversion algorithm in LS-DYNA software was employed to model the perforation process. The simulation results of the debris cloud shape and number of debris were in good agreement with the flash X-ray radiographs and perforated holes on the witness plate, respectively. Three-dimensional numerical simulations of EFP's penetration under various impact conditions were conducted. The results show that, an ellipsoidal debris cloud, with the major-to-minor axis radio (a/b) smaller than that caused by shaped charge jets, was formed behind the target. With the increase of target thickness (h) and decrease of impact velocity (v₀) and obliquity (θ), the value of a/b decreases. The number of debris ejected from target is significantly higher than that from EFP. Based on the statistical analysis of the spatial distribution of the BAD, An engineering calculation model was established considering the influence of h, v₀ and θ. The model can with reasonable accuracy predict the quantity and velocity distribution characteristics of BAD formed by EFP.